Owner`s manual

Enter the MAXIMUM programming mode by pressing the Function button

five times.

Set the display to any desired number that will now represent the maximum

allowable volume setting for the selected input.

Exit the programming mode by

pressing and holding the Function

button

FIXED Gain mode

In some systems (some A/V installations, for example) it is desirable to set a

particular input to a fixed gain, that is then becomes unaffected by the volume

knob. Most often it is required to set the preamplifier gain to Unity (Gain of 1).

The VK-33 allows the user to do so by using its FIXED gain function.

Press the Function button six times.

The display will read: FIX OFF

Enter any desired number for the fixed gain on the selected input (see

below).

UNITY gain for the VK-33 preamplifier correspond to the

following volume setting:

CNTS display mode 100 Counts

DBU 00.0dB

DBM -20.0dB

Exit the programming mode by

pressing and holding the Function

button.

DISPLAY MODE programming

The volume display of the VK-33 can be switched to work in any of the following

three modes: