Owner`s manual

PHASE programming.

Select the desired input.

Press the Function button three times. The display will read: PHASE NINV.

Use the volume knob to set the condition to NINV, INV or LAST.

Exit the programming mode by pressing and holding the Function button.

NOTE: In the LAST mode, the state of the PHASE switch will be the same as used the last

time for that particular input.

MONO/STEREO programming.

Select the desired input.

Press the Function button four times. The display will read: STEREO

Use the volume knob to set the condition to STEREO, MONO or LAST.

Exit the programming mode by pressing and holding the Function button.

NOTE: In the LAST mode, the state of the Phase switch will be the same as used the last

time for that particular input.

MAXIMUM gain programming

It may be desirable to limit the allowable volume setting on a particular input. To do this:

Select the desired input

Enter the MAXIMUM programming mode by pressing the Function button five times.

Set the display to any desired number that will now represent the maximum allowable

volume setting for the selected input.

Exit the programming mode by pressing and holding the Function button.

FIXED Gain mode