Repair Hints

Table Of Contents
4.3 Replacing easy opening handle
Required tools:
Phillips screwdriver PH2
Prerequisite:
Appliance is disconnected from power supply.
Door is open.
4.3.1 Removing easy opening handle
1. Remove easy opening handle cover (1).
2. Unscrew two screws (2).
Easy opening handle is removed.
4.3.2 Installing easy opening handle
Easy opening handle mechanism should be properly set before installa-
tion.
Correct arrangement of push rod (1), toothed quadrants (2) and (3),
spring (4) and limit stop (5) for the door left side installation is shown on
the graphic.
Arrangement of easy opening handle sub-components for door right side
installation is described in the document "Installation instruction".
Install in reverse order.
Repair
2021-03-09_9001631450 Copyright by BSH Hausgeräte GmbH Page144of639