Repair Hints

Table Of Contents
4.4 Replacing door upper hinge (door with display)
Required tools:
Torx Bit TX20 6,3mm (1/4") [00340865]
Warning
Heavy, bulky appliances!
Back and muscle injuries
Appliance door removal operation should only be carried out by
trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
Wear protective gloves.
Warning
Slipping of tilted appliances!
Bone fractures / crush injuries
Secure appliances against slipping.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
Secure component from falling down.
Danger
Risk of electric shock due to live parts!
Danger to life through electric shock in case of improper repair
Electric parts should be repaired by a qualified electricians.
After the repair have a safety test according VDE 0701 or country-
specific regulations performed.
Danger
Risk of electric shock due to live parts!
Death by electrocution
Disconnect appliances from electrical supply at least 60 seconds
before starting repairs.
Prerequisite:
Appliance is disconnected from power supply.
Appliance interior fittings are removed.
4.4.1 Removing door upper hinge
1. Place appliance on the back side.
Repair
2021-09-30_9001631452 Copyright by BSH Hausgeräte GmbH Page173of769