Repair Hints

4.3 Replacing sliding hinge
Required tools:
Torx Bit TX20 6,3mm (1/4") [00340865]
Warning
Heavy, bulky appliances!
Back and muscle injuries
▶
Appliance door removal operation should only be carried out by
trained specialists.
▶
To move the appliance, two people are required.
▶
Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
▶
Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶
Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Furniture door and appliance door are separated. See Installation Instruction.
4.3.1 Removing sliding hinge
1. 1. Unscrew two screws (1).
2. Remove upper door upper hinge (2).
3. Remove upper door (3).
4. Unscrew two screws (4).
5. Remove lower door upper hinge (5).
6. Remove lower door (6).
Repair
2021-03-10_9001628069 Copyright by BSH Hausgeräte GmbH Page108of457