Operation Manual

en
21
Intensive drying
By activating the ”Intensive drying”
function, the final rinse will produce
a higher temperature in all programmes
resulting in an improved drying result
(please note that higher temperatures
might have an effect on delicate items).
Close the door.
Hold down programme button A and
press main switch until
1 the digital
display illuminates.
Release both buttons.
The LED for button
A flashes and the
digital display
3 displays the factory
setting
(off) or (on)
To change the setting, press
programme button
A .
Switch off the main switch 1 ; the
chosen setting has now been stored.
Additional functions *
* on applicable models
Pre-Soak *
The Pre-Soak programme option serves to
perform a pre-soak cycle before the main
programme. This cycle enables cookware,
e.g. pans, bowls, etc. to be pre-soaked
and pre-rinsed in the lower rack. If you
wish to pre-soak the dishes, this
programme option must be selected by
pressing the “Pre-Soak” button before the
programme starts. The recommended
detergent amount is approx. 5 g poured
onto the inside of the door.
Quick *
Pressing the “Quick” button provides a
short wash cycle by curtailing the drying
phase and the washing time. The washing
and drying performance will be reduced
with the Quick programme option.
Washing contents of UPPER
RACK only *
If you have a small number of dishes to
wash in the upper rack (e.g. glasses, cups,
plates), switch on the UPPER RACK
function. If you select the UPPER RACK
function, the lower rack must be empty.
Add a reduced amount of detergent
compared to that which is recommended
for a full load.
Washing contents of
LOWER RACK only *
If you have a small number of dishes to
wash in the lower rack (e.g. plates, pans,
bowls), switch on the LOWER RACK
function. If you select the LOWER RACK
function, the upper rack must be empty.
Add a reduced amount of detergent
compared to that which is recommended
for a full load.