User manual

12
Set Pool Temp
Set Spa Temp
Heater
Heat Pump
Pool Mode Heat
Spa Mode Heat
Solar Heat
Spa Filter Heat
Heater
Enable
Disable
Polling
Heat in Filter
Manaul
Disable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Set Polling
Main Menu
HEATER SETTINGS AT-A-GLANCE
Mode Pool
Pool Light
Spa Light
Filter Pump
Heater
Pool Temp
Air Temp
10/09/06 Pool Set 80F
Monday 12:42 PM
Alert / Error
(Display Screen)
1
4
Left Arrow to Exit
Heater Settings
Actual operation of various heating devices can be configured using this menu.
Disable
Spa Filter Heat
Pool
80˚F
Temp
2
3
83˚F
100
˚F
Disable
Disable
Disable
Set Pool Temp
Set Spa Temp
Heater
Heat Pump
Pool Mode Heat
Pool
80˚F
Temp
Main Menu
Device Control eater
Scenes / Timers
Heaterevice Control
Mode Pool
Setup
Vacation Mode Of f
(3) Set Pool and Spa Temp: Press Select then Arrow Up or Down to set temperature. Press
Select to enter.
Heater: Press Select to enable or disable the heater.
Heat Pump: Press Select to enable or disable a heat pump.
Pool Mode Heat: Press Select to choose between:
heat in filter - heat during filter cycles only
polling - to measure temperature of water at intervals; heat to set temperature
disable - do not heat
manual - heat upon manual command
HEATER SETTINGS
(4) Spa Mode Heat: Press Select to enable or disable heat in Spa Mode.
Solar Heat: Press Select to enable or disable solar heat.
Spa Filter Heat: Press Select to enable or disable the heater during spa filter cycles.