User manual

19
Set Low ORP
Set High pH
Set Low pH
Set High TDS
Set Low TDS
Chlorine Gen.
Chemical Feeder Chemical Feeder
Duration in min
Ecomatic
ORP threshold
Extend Filter Cycle
Set High ORPChemistry
Enable
Disable
Enable
Disable
Enable
Disable
Main Menu
CHEMISTRY SETTINGS AT-A-GL ANCE
(Display Screen)
Chemistry
High and Low Limits for each chemistry reading has been set by the manufacturer. If the chemistry sensor reading is outside the
present limits, an alert will flash on the Main Menu Screen. Default limits can be changed to your preference.
(3-4) Chemistry High and Low
Limits: High and Low Limit defaults
have been set by manufacturer.
However, if you prefer different limits,
you may change them by pressing
Select (as shown), then Arrow Up or
Down to change. Press Select again
to save.
(Main Menu)
(5-6) Chlorine Generator: If you have
an optional ECOmatic attached to
your system, Right Arrow on Chlorine
Gen. (shown) to access the ECOmatic
Setup. Press Select to Enable or
Disable the Chlorine Gen., Extend
Filter, or POC Control (if available). The
ORP level is changed by highlighting
Set ORP Level. Select. When flashing,
change the ORP level value with the
UP or Down key. Press Select to set.
Left Arrow to Exit.
7.5
ORP mV
TDS ppm
pH
710
2400
Set Low TDS
Chlorine Gen.
2000
5
Ecomatic Setup
Chlorine Gen.
Set ORP Level
Extend filter
POC Control
Enable
700
Disable
Off
6
Mode Pool
Pool Light
Spa Light
Filter Pump
Heater
Pool Temp
Air Temp
10/09/06 Pool Set 80F
Monday 12:42 PM
Alert / Error
1
2
Pool
Main Menu
Mode
Heater
Chemistry
Device Control
Scenes / Timers
Wireless Setup
3
7. 5
ORP mV
TDS ppm
pH
710
2400
Set High ORP
Set LOW ORP
Set High pH
Set Low pH
Set High TDS
800
650
7. 9
7. 2
4000
4
7. 5
ORP mV
TDS ppm
pH
710
2400
Set Low TDS
Chlorine Gen.
2000
CHEMISTRY