User manual

7
Poolux Wireless Panel Operation
Note: If the wireless panel should freeze (the display is lit, but does not respond to a button press), the panel can
be reset by pressing all four navigation (Left, Right, Up and Down) buttons at the same time. The panel can then be
restarted by pressing and holding the Select button.
CHARGING THE WIRELESS PANEL
The design of the Wireless Panel cradle allows the Wireless Panel to be continuously charged as it rests in the cradle.
If the Wireless Panel should start to discharge, the battery icon will indicate so. The Wireless Panel can be charged by
placing the Panel back into the cradle, or the cord can be disconnected from the cradle and plugged directly into the
back of the Wireless Panel and placed on a table or used handheld while it is charging
The power cord can be
placed into either of the
power jack receptacles.
Wireless Panel
cradle
Wireless Panel
The Main Menu Screen options shown may be displayed in a different order on your control and will only appear if
available on your system.
Mode-Pool
Pool Light
Spa Light
Filter Pump
Heater
Pool Temp
Air Temp
10/09/06 Pool Set 80F
Monday 12:42 PM
Alert/Error
Select
Arrow Left
Arrow Down
Arrow Up
Arrow Right
7 LEDs correspond to the 7 items
on the left side of the display.
They light to indicate operation or alert.
Indicates RF Link Established
Indicates Battery is Charging
Indicates Fully-Charged Battery
The Poolux Wireless Panel
BASIC PANEL FUNCTIONS