User Guide

3-2 Basic Installation MN1904
3.1.3 Tools and miscellaneous hardware
H Your PC operating system user manual might be useful if you are not familiar with
Windows
H A small screwdriver (supplied) with a blade width less than 2.5mm (1/10 in).
H M5 screws or bolts for mounting the NextMove BX
II
H Crimping tool.
A connector kit is supplied with your NextMove BX
II
, containing a number of useful connectors
and accessories.
3.1.4 Other information needed for installation
This information is useful (but not essential) to complete the installation:
H The data sheet or manual provided with the servo drive controlling the motor , describing
the wiring information of the cables/connectors
H Knowledge of which digital inputs/outputs will be ‘Active Low’, ‘Active High’ or edge
triggered.