User Guide

Operation 5-27MN1904
5.10 Saving setup information
When power is removed from the NextMove BX
II
, configuration and tuning parameters are
lost. You should therefore save this information in a file, which can be loaded after the unit is
started. Alternatively, the information can be included in program files as part of the Startup
block. Program files are stored when power is removed, so the Startup block can be used to
restore configuration and tuning parameters automatically whenever a program is run.
1. In the Toolbox, click the Edit & Debug icon.
2. On the main menu, choose File, New File.
A new program editing window will appear.
3. On the main menu, choose Tools,
Upload Configuration Parameters.
WorkBench v5 will read all the
configuration information from the
NextMove BX
II
and place it in a
Startup block. For details of the Startup
block, see the Mint help file.