Specifications

AC Servo Drive Solutions
EuroFlex is a compact rack mounted servo amplifier, ideally matched to Baldor’s NextMove ES motion
controller and range of cog free linear servo motors. Operating over a 18—56 VAC (25—80 VDC) bus,
EuroFlex is ideally suited to low voltage applications such as in the medical and semi-conductor sectors.
Rack Mount AC Servo Drive
>
Brushless AC Drive - 5 Amps
continuous, 15A peak
>
18-56 VAC input
>
EuroCard 3U rack mounted module
>
Sinusoidal commutation with encoder
feedback
>
RS485 port for commissioning and
diagnostics. RS232 optional
>
Ideally matched to Baldor's NextMove ES motion
controller
EuroFlex
>
Technical Data
>
Technical Data
Rack Mount Solution
EuroFlex is suited to Baldor's multi-axis motion controller,
NextMove ES, a rack mount card. Both cards are single
EuroCard in length (160mm). NextMove ES can control up to
2 axes of servo, plus a further 4 stepper axes.
Min/Max AC Supply
1 or 3 phase 18-56 VAC 50/60Hz or 25-80 VDC
Nominal DC Bus Supply
25-80 VDC
Cont./Peak Current
5/15 Amps (3 secs)
Digital Inputs
Two Inputs: Enable, Reset (software configurable) - Opto-isolated (10-30VDC)
Digital Outputs
One Output: Drive OK - opto-isolated
Analog Command Input
±10V with 12-bit ADC resolution. Programmable for torque or velocity command
Step and Direction Input
Single ended 5V TTL. 400MHz maximum frequency
Feedback
Commutating incremental encoder with encoder loss detection. Max. frequency 10 MHz
Hall sensor (no encoder) for trapezoidal commutation
Encoder Output
Simulated encoder output for connection to external motion controller
Commutation
Sinusoidal commutation encoder
Trapezoidal commutation with Hall sensors only
Modes of Operation
Torque control, velocity control or step and direction
Communications
Multi-drop RS485 for commissioning and diagnostics. RS232 optional
 NextMove ES multi-axis
motion controller
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com