Specifications
MN1957 Specifications 7-5
www.baldormotion.com
7.1.13 Declaration of Conformity
Manufacturer
Address
The Electromagnetic Compatibility Directive 2004/108/EC
: Baldor UK Ltd.
: Mint Motion Centre, 6 Bristol Distribution Park, Hawkley Drive, Bristol, BS32 0BF, United Kingdom.
Hereby declare that the product:
NextMove ESB2 Multi-Axis Motion Controller, being one of:
NSB20X-XXX ( X-XXX )
when used in accordance with the guidance given in the corresponding NextMove ESB2 Installation Manual, MN1957, conforms
with the protection requirements of the following Council Directives, byapplication of the relevant harmonised standards:-
and its amending directives:-
where = Product Variant
Date: 14/01/08 Ref: DE00029-000
EN 61000-6-2 : 2005
Generic Standard - Immunity Standard for Industrial Environments
EN 61000-6-4 : 2007
Generic Standard - Emission Standard for Industrial Environments
and in detail with the following basic standards:
Standard:
Title:
Standard:
Title:
EN 61000-4-4 : 2004
EFT/Bursts
EN 61000-4-2 : 1995+A1+A2
Electrostatic Discharge
IEC 61000-4-3:2002
RF Immunity
IEC 61000-4-6 : 2003RF Common Mode
The Machinery Directive 98/37/EC and its amending directives:-
The above product is intended to be incorporated into machinery or to be assembled with other machinery to constitute
machinery covered by directive 98/37/EC.
As such does therefore not in every respect comply with the provisions of directive 98/37/EC.
Users must follow the guidance given in this directive to meet all necessary protection requirements. All instructions, warnings &
safety information of the product manual MN1957 must be adhered to. User must follow the guidance given in harmonised
standard EN60204-1 (Safety of Machinery) to meet necessary protection req
uirements of this directive.
Furthermore it is declared that it may not be put into service before the machinery in which it will be incorporated is declared to
comply with the provisions of directive 98/37/EC, as amended.
Signed: ...................................................................
Dr. Gerry Boast
Engineering Manager
EC Declaration of Conformity
EC Declaration of Incorporation