User Guide

Operation 3-3MN850
Operating Modes
System Status Mode
Description Display Comments
During normal operation, the display shows the status
of operation.
OPTIMIZE
CURRENT 183 A
Shows that Optimized operation
is selected and the load current is
183 amperes.
Menu Mode At the power up display, press ENTER one time to go to the menu mode and display the
level 1 menu.
Description Display Comments
In the menu mode, a flashing cursor is displayed. Use
the ⇑ or ⇓ keys to scroll through the menu items. Use
the ENTER key to select a menu item or move to the
next level.
APPLICATIONS
BASIC
V represents blinking cursor.
Data Entry Mode At the menu mode, scroll to the desired parameter value you wish to change. Press
enter to view or change the data. (If a blinking cursor is not present, the data is read
only.)
Description Display Comments
In the data entry mode, a flashing cursor is displayed.
Use the ⇑ or ⇓ keys to increase or decrease the value
of the parameter. Use the ENTER key to save the
data value. The display will flash one time if the value
is accepted. The display will flash two times if the
value is erroneous.
START PEDESTAL
20 PERCENT
V represents blinking cursor.