User Guide

3-8 Operation MN850
Keypad Starting and Running the Motor with Factory Settings
Action Description Display Comments
Apply Control Voltage
(115VAC)
Keypad Display shows this
opening message.
Baldor Soft Start
Logo display for 2 seconds.
If no faults the display will show
this message.
Stopped & Ready
System Status mode.
Press ENTER key
APPLICATIONS
AUTO FEATURES
Press ENTER key Access Level 1 Application Menu.
Settings
Default (Keypad)
Press ⇓ key two times Scroll to the correct application.
Small Pump
Large Pump
Press ENTER key Select the application.
Large Pump
Conveyor
Large pump is selected in this
example.
Press ENTER key Choose set of parameters for the
application.
Send to Store
’#’=no Enter=Yes
Press ENTER key Scroll to the PASSWORD menu.
Storing
Press # key twice Press # key two times to exit
programming.
Large Pump
Conveyor
Press Start/Stop key Displays motor starting current
and full voltage and current.
Starting
Current 8A
Full volts
Current 8A