User Guide

Parameter Index 4-5MN850
Permanent Store Menu
Block Title Parameter Description
Permanent Store Save Parameters Saves all parameter values and overwrites previously saved values.
Power on
Parameters
Restores all parameter values to the values that were last saved (last power up cycle).
All parameter values changes since last power up are overwritten. Display blinks
twice to confirm reset is complete.
Default Parameters Restores all parameter values to the factory settings. All parameter values are
overwritten. Display blinks twice to confirm reset is complete.
Password Menu
Block Title Parameter Description
Password Enter Password If a password is set, it prevents unauthorized users from changing any parameter
values. Value can be 0 to 255 (0=no password). If the correct password is entered,
all parameters are unlocked. Parameter 5.
Change Password If the parameters are unlocked, a new password can be set using this option. Value can
be 0 to 255 (0=no password). Parameter 5.
Note: Remember your password. Removing power etc. will not clear the
password. When a password is set, use Enter Password to unlock
the parameters.
Inputs Menu
Block Title Parameter Description
Inputs Digital i/p1 Input 1 is available at J10, terminals S1 (hot) and S0 (neutral). May be set as follows:
Map to – Value can be parameter 0 – 112. Parameter 65.
Bit number – Press “Optimise” to shift one position to the left. Press “⇑” to change that
character to a logic 1. Press “⇓” to change that character to a logic 0.
The value is stored in Parameter 66.
Polarity – Value of each of the 8 I/O bits can be Positive or Inverse Logic. The value is
stored in Parameter 54.
Digital i/p2
Reserved for future use.
Digital i/p3
Reserved for future use.
Temperature i/p
Reserved for future use.
4–20ma i/p
Reserved for future use.
DC i/p
Reserved for future use.