Manualshelf

User Guide

ManualsBrandsBaldor ManualsOtherMN850
31323334353637383940
Parameter Index 4-11MN850
Title P# Parameter Description
Parameters
Continued
P60 K2 Bit Mask (P59 bit selected for K2) Sets the bit in the parameter selected by P59 that operates the relay
K2 on the control card. The preset is P8:Status 1, Bit3 (Top of Ramp
or Full Volts). (P60 operates with P59).
7 6 5 4 3 2 1 0
Bits
1 0 0 0 0 0 0 0
0 1 0 0 0 0 0 0
0 0 1 0 0 0 0 0
0 0 0 1 0 0 0 0
0 0 0 0 1 0 0 0 (Preset)
0 0 0 0 0 1 0 0
0 0 0 0 0 0 1 0
0 0 0 0 0 0 0 1
P61 MAP K3 TO (Parameter) Value is the destination parameter number for the K3 bit.
Parameter 62 is the mask for P61 (Map K3 To).
P62 K3 BIT MASK Parameter 62 is the mask for P61 (Map K3 To).
P63 MAP K4 TO (Parameter) Value is the destination parameter number for the K4 bit.
Parameter 64 is the mask for P63 (Map K4 To).
P64 K4 BIT MASK Parameter 64 is the mask for P63 (Map K4 To).
P65 Map I/P1 To (Parameter) The parameter number that will control Input 1 on the control card.
The preset is P52: User Flags 1–2. (Parameter 66 is the mask for
P65, Map I/P1 To). (Mapped to means electronic transfer of the
analog value.)
P66 I/P1 Bit Mask (P65 bit selected for I/P1) Sets the bit in the parameter selected by P65 that operates Input 1 of
the control card. The preset is P52:User Flags 1–2, Bit4 (Board
Start/Stop). (Parameter 66 is the mask for P65, Map I/P1 To).
7 6 5 4 3 2 1 0 Bits
1 0 0 0 0 0 0 0
0 1 0 0 0 0 0 0
0 0 1 0 0 0 0 0
0 0 0 1 0 0 0 0 (Preset)
0 0 0 0 1 0 0 0
0 0 0 0 0 1 0 0
0 0 0 0 0 0 1 0
0 0 0 0 0 0 0 1
P67 Map I/P2 To (Parameter) The parameter number that will control Input 2 on the control card.
The preset is P0. (Parameter 68 is the mask for P67, Map I/P2 To).
(Mapped to means electronic transfer of the analog value.)
P68 I/P2 Bit Mask (P67 bit selected for I/P2) Parameter 68 is the mask for P67, Map I/P2 To.
P69 Map I/P3 To (Parameter) The parameter number that will control Input 3 on the control card.
The preset is P0. (Parameter 70 is the mask for P69, Map I/P3 To).
(Mapped to means electronic transfer of the analog value.)
P70 I/P3 Bit Mask (P69 bit selected for I/P3) Parameter 70 is the mask for P69, Map I/P3 To.