User Guide

B-2 Applications MN850
Read Only Parameter Values
Title P# Parameter Adjustable Range Factory User Setting
Parameters P36 % Overload (status only) 0–100% (100%=Tripped) 0%
P37 Chassis Temperature 0–255 0
P38 Pot1 0–255 0
P39 Pot2 0–255 0
P40 Pot3 0–1 0
P41 DC I/P 0–12 0VDC
P42 Thermistor 0–255 0
P43 4–20mA I/P 0–20.4 0mA
P44 TEMP Trip Level 20–255 30
P45 4–20mA Map 0–125 0 (parameter #)
P46 4–20mA Set Level 0.08–20.32 10.24mA
P47 DC Input Map 0–125 0 (parameter #)
P48 Set Level DC I/P 0.03922–9.960784 5.019608 VDC
P49 Map DAC O/P 1 0–125 26 (parameter #)
P50 Map DAC O/P 2 0–125 22 (parameter #)
P51 User Flags 1 0–255 142 (Bit 10001110)
P52 User Flags 2 0–255 0 (Bit 00000000)
P53 User Flags 3 0–255 19 (Bit 00010011)
P54 I/O Polarity 0–255 127 (Bit 01111111)
P55 MAP LED 0–255 9 (x Ie)
P56 LED MASK 0–255 1 (x Ie)
P57 Map K1 To (Parameter) 0–125 52 (Parameter #)
P58 K1 Bit Mask (P57 bit selected for K1) 0–255 32 (bit 00100000)
P59 Map K2 To (Parameter) 0–125 8 (Parameter #)
P60 K2 Bit Mask (P59 bit selected for K2) 0–128 8 (bit 00001000)
P61 Map K3 To (Parameter) 0–125 9 (Parameter #)
P62 K3 Bit Mask (P61 bit selected for K3) 0.1–3 1 (bit 00000001)
P63 Map K4 To (Parameter) 0–125 9 (Parameter #)
P64 K4 Bit Mask (P63 bit selected for K4) 0–3 2 (bit 00000010)
P65 Map I/P1 To (Parameter) 0–125 52 (Parameter #)
P66 I/P1 Bit Mask (P65 bit selected for I/P1) 0–128 16 (bit 00010000)
P67 Map I/P2 To (Parameter) 0–125 0 (Parameter #)
P68 I/P2 Bit Mask (P67 bit selected for I/P2) 0–128 0 (bit 00000000)
P69 Map I/P3 To (Parameter) 0–125 0 (Parameter #)
P70 I/P3 Bit Mask (P69 bit selected for I/P3) 0–128 0 (bit 00000000)
Advanced Current P71 Contactor Delay (after start command) 20–800milli seconds 160 milli seconds
P72 Trip Sensitivity (1=fastest trip) 1–15 (Status Code) 1
P73 Last Trip (Most Recent Trip) 1–16 (Status Code) 0