Series 15H Applications Centrifugal Fan – The Baldor inverter is used to adjust the CFM (and associated pressure) of a fan. Typically, in the past, inlet vanes and outlet dampers have controlled air flow. These techniques are effective and well accepted, but not very energy efficient. With the Baldor inverter – vanes, dampers,actuators and their associated maintenance may be eliminated. Additionally and most importantly, power consumption is decreased by the cube of the speed decrease.
Matched Performance™ 33.0 11.00 30.0 10.00 TORQUE (ft-lbs) PEAK TORQUE 27.0 9.00 24.0 8.00 AMPS 21.0 7.00 18.0 6.00 15.0 HP TORQUE 5.00 12.0 4.00 9.0 3.00 CONTINUOUS OPERATING AREA 6.0 2.00 3.0 1.00 HORSEPOWER • AMPS ID15H405-E Control IDM3665T Motor 5HP RATED 0.0 0 400 800 1200 1600 2000 2400 2800 3200 3600 0.
The Baldor Keypad Baldor has developed a keypad which will allow the operator to enjoy the flexibility expected in today’s controls and the ease of operation you have always hoped to have. Baldor includes twelve keys on the keypad. The keys depress so you “feel” that you have pushed them. We have also included a 32 character English “alpha-numeric” display. You don’t have to be a detective to know what you are doing - the display helps you whether you are operating, programming or monitoring.
Series 15H Features FWD MOTOR SPEED LOCAL 1750 RPM Removable Keypad The Baldor keypad is designed to be removed from the main control and mounted up to 100 feet away. This will allow the control to be mounted in a convenient location, and the keypad near the operator for ease of use. COMMAND SELECT P: POTENTIOMETER English Display The keypad displays both the operating conditions and the programming steps in easy to follow English.
Quad Ratings Why Quad Ratings? With Quad Rating each control can be setup to operate in one of four distinct output operating zones. The zones are defined by the PWM frequency, continuous output current, and peak output current. The control may also have different horsepower ratings depending on the selected operating zone. By selecting the desired Operating Zone the control will automatically set the PWM frequency, continuous current, and peak current to the proper values for the desired operating zone.
DESIGN SPECIFICATIONS OPERATOR KEYPAD • • • • • • • • • • • • • • • • • • • • • • • • • • • • Microprocessor controlled PWM output Output frequency 0.25-120Hz, optional 0.
Typical Remote Control Connections Operation Mode: Standard run - 3 wire control J4 1 ANALOG GND 2 ANALOG INPUT #1 3 POT REFERENCE 4 ANALOG INPUT+ #2 5 ANALOG INPUT - #2 PROGRAMMABLE 0-5V OUTPUT (FACTORY SETTING: SPEED) 6 ANALOG OUT 1 PROGRAMMABLE 0-5V OUTPUT (FACTORY SETTING: CURRENT) ENABLE 7 ANALOG OUT 2 8 INPUT #1 9 INPUT #2 10 INPUT #3 11 INPUT #4 12 INPUT #5 13 INPUT #6 14 INPUT #7 15 INPUT #8 16 INPUT #9 17 39 +24VDC 18 40 OPTO IN POWER 19 41 OPTO OUT #1 RETU
Dynamic Braking Resistor Assemblies (RGA) Dynamic Braking Resistor Assemblies include braking resistors completely assembled and mounted into a NEMA 1 enclosure. For 25 hp and above (-EO Controls), select the braking resistor from the table with the matching ohms for the RTA selected and adequate continuous watts capacity to meet load requirements.
Expansion and Accessory Boards Baldor offers a wide variety of plug-in expansion boards to allow the Series 15H vector controls to be interfaced with various inputs and outputs. One or two expansion boards may be mounted into the control to custom tailor the inputs, outputs, and feedback requirements to the application. Baldor also offers several expansion boards that will allow direct interfacing with popular PLC’s.
Outline and Dimensions Z U JOG Ø.25 LOCAL PROG FW D DISP REV SHIFT ENTER STOP RESET X Y V .25 DIMENSIONS-IN (mm) OUTSIDE MOUNTING HEIGHT(X) WIDTH(V) DEPTH(Z) HEIGHT(Y) WIDTH(U) 12.272 7.974 7.120 11.5 7.2 (312) (203) (181) (292) (183) 12.150 8.700 8.730 11.5 7.2 (309) (221) (222) (292) (183) SIZE A B2 Z U AIR OUTLET JOG Y LOCAL FWD DISP REV SHIFT STOP RESET PROG ENTER X V SIZE NOTE: Size B2, C2, D2, E and F controls can also be mounted in a thru wall configuration.
Baldor offers a broad line of products to meet your application needs. Visit www.baldor.com to request copies of these catalogs: Series 18H Vector Controls BR718 Inverter and Vector Drive Motors BR400 Stock Product Catalog Large Frame AC Induction Motors BR435 5 0 1 Effective: March 12, 2001 Generators Inverters & Vectors General Purpose TM Premium Efficiency Made in the U.S.A.