User manual

28 Modbus RTU MN744
Message Display Description
EE_DEVICE_FAILURE Operation on EE device failed
EEPROM_ACCESS Error accessing EEPROM device
FEEDBACK_COMMS_BUSY Feedback device comms is busy
FEEDBACK_DATUM_ERROR Feedback device is unable to datumise
FEEDBACK_ERROR Feedback device has error
FEEDBACK_MESSAGE_CORRUPT Feedback device comms message is corrupt
FEEDBACK_MOTOR_DATA_ERROR Motor data stored on encoder is invalid
FEEDBACK_NOT_RESPONDING Feedback device comms is not responding
FIELDBUS_INIT_ERROR Error initialising the Fieldbus card
FIELDMARSHAL_EEPROM_ACCESS Error accessing FieldMarshal EEPROM
FILE_PROTECTED Mint File is Protected.
FILE_TOO_BIG File too big for available memory
FLASH_BEING_PROGRAMMED Command invalid when Flash in use
FLASH_PROGRAMMING Error programming Flash
ICM_ARRAY_ERROR ICM protocol error
ICM_BLOCK_TOO_BIG ICM protocol error
ICM_DATA_TIMEOUT ICM Timeout
ICM_DISABLED ICM is disabled on this channel
ICM_DLL_ERRORS Errors in the Rxd DLL SO telegram
ICM_DLL_MESSAGE_ID_MISMATCH DLL SO telegram id doesn't match
ICM_HOST_BUSY The host is not ready for the ICM reply
ICM_RETURN_TIMEOUT ICM Timeout
ICM_TL_BUSY TL is busy - still processing command
ICM_TL_GROUP_MESSAGE_ID Group message id mismatch
ICM_TL_GROUP_SEQUENCE Group message packet No out of sequence
ICM_TL_HOST_RETRANSMITS Too many host retransmit requests
ICM_TL_NO_OF_PACKETS Invalid No of packets specified
ICM_TL_TRANSMIT_REQUESTS Too many transmit requests - timed-out
ICM_TOO_MANY_ARRAYS ICM protocol error
ICM_TX_SIZE_MISMATCH ICM protocol error
INCOMPATIBLE_CONTROL_MODE Incompatible control mode.
INCOMPATIBLE_PARAMETER_TYPE Incompatible parameter data type
INCOMPATIBLE_SETTINGS Incompatible with previous settings
INCORRECT_CRC_ERROR Received Modbus PDU CRC failed
INCORRECT_PDU_LENGTH_ERROR Received Modbus PDU length did not match
INCORRECT_REF_SOURCE Reference source is not Host when trying to set a speed ref using Mint keyword
INITIALISATION_FAILURE A failure occurred during initialisation
INVALID_ALLOCATION_TABLE Invalid object allocation table
INVALID_AXIS axis specified out of range
INVALID_AXISMODE Move not allowed in this mode.
INVALID_BBP_FIELD_LENGTH BBP Transaction has wrong length
INVALID_BBP_PACKET_SIZE_RXD BBP Transaction Rxd size too big
INVALID_BBP_TRANS_NO BBP Transaction No. not supported
INVALID_BBP_TRANSACTION_RXD Invalid BBP Transaction Rxd
INVALID_BUS_NUMBER CAN bus number was out of range.
INVALID_CHANNEL adc / dac channel out of range
INVALID_COIL An invalid coil number was received
INVALID_DATA_ELEMENT A packet was received with at least one data element out of range
INVALID_DISCRETE_INPUT An invalid discrete input number received
INVALID_DRIVE_CONTROL_MODE Operation is invalid in this drive control mode
INVALID_DRIVE_PARAM Invalid Drive Parameter No.
INVALID_EE_DEVICE_ID_NUMBER An invalid EE device ID number was received
INVALID_HARDWARE Hardware not present
INVALID_IMAGE_FORMAT_CODE The image files format is invalid