Specifications

- 10 -

Franklin Electric 1 Phase ODP Motor

Stock Number See Figure HP

1103017429 10 1/2

1103017430 10 3/4

1103017431 10 1

1103017432 10 1 1/2

Franklin Electric 3 Phase ODP Motor

Stock Number See Figure HP

1303013103 11 1/2

1303023103 11 3/4

1303033103 11 1

1303043103 11 1 1/2

Figure 10

Franklin Motors Connection Diagrams

Figure 11

If the supply voltage is 460 volts, refer to the motor wiring diagram show in (Figure 11) to properly rewire the motor.

Motor shaft rotation - 3 phase motors

1. Turn the power off.

2. Remove the circular end cap located on the back of the motor. This will expose the motor shaft.

3. Momentarily start pump. If the connection is correct, the shaft will rotate clockwise. If not reverse any two

incoming lines (Power Leads).

Motor shaft rotation - 1 phase motors

1. To reverse rotation, interchange orange and red wires.