User Guide

5.
6.
'art to remove
Front cover
Fuel pipe
and plug
(Discon-
nection)
(1) Remove the element cover by
unscrewing M6 X 12 screw.
(See Fig.
10-6.)
(2) Remove the front cover by unscrewing
three M5 X 8 screws. (See Fig. 10-6.)
1
Element cover
Fig. 10-6
(1) Discharge fuel from the tank.
1. Shut the fuel striner.
2. Remove the strainer cup.
3. Put a vessel to receive fuel under the
strainer and open the fuel cock to
discharge fuel. (See Fig. 10-7.)
4. Attach the strainer cup to the strainer
body
(2) Disconnect fuel hose from the strainer.
Loosen the hose clamp on top of the
strainer and pull out the fuel hose from
the strainer. (See Fig. 10-8.)
Use utmost care about
fire hazard.
Wipe off spilt fuel
throughly.
Do not lose the filler
screen.
Tool
~
(-) Driver
(+) Driver
Pliers
II
Fig. 70-7 Fig. 10-8
- 34 -