User Guide

Part to remove
Fuel tank
Description
(1) Remove the two M6X 12 flange bolts
from the blower housing.
(See Fig.
10-10.)
(2) Remove the fuel tank by taking off the
two M8 nuts from the bottom of the
tank. (See Fig. 10-1 1.)
Remarks I Tool
lOmm box wrench
12mm box wrench
Bracket
(Cover)
End cover
Fig. 10-1 0 Fig. 10-1 7
(1) Remove the bracket cover from the
generator by loosening the
two M8 X 30
bolts. (See Fig. 10-12.)
I
I
(1) Remove the end cover from the generator
by unscrewing the four
M5 X 10 screws.
(See Fig. 10-12.)
Fig. 10-12
12mm box wrench
(+) Driver
- 36 -