User Guide

I step I Part to remove I Description I
Remarks I Tool
11.
Rear bracket
(1) Loosen and take out the three M6 cover
bolt.
(See Fig. 10-13.)
(2) Remove condenser from rear bracket.
(3) Remove the connector of the diode
rectifier and then remove the earth cable
terminal from the rear bracket.
(See Fig. 10-14.)
lOmm box wrench
Box spanner
Box spanner and
screw driver
(+)
Fig. 10-13 Fig. 10-14
(4) Remove the rear bracket, tapping it
evenly with a plastic mallet.
(See Fig. 10-15.)
(5) Remove mount rubbers from rear cover.
(See Fig. 10-16.)
Plastic mallet
Wrench
I
Fig. 10-15 Fig. 10-16
- 37 -