User Guide

ManualsBrandsBaldor ManualsOtherPC13R

13.

14.

-

Dart

to

remove

Rotor

Front bracket

Descrlptlon

I

Remarks

4.

Screw the bolt into the thread of the

rotor shaft.

5.

Torque the bolt using a socket wrench

until the rotor comes off loose.

*

The hydraulic pressure inside the rotor

shaft

takes

apart the

rotor

from the

engine shaft.

(4) Wipe off oil throughly from rotor shaft

and engine

PTO

shaft.

Fig.

10-24

(1)

Remove the front bracket, which

is

mounted on the main bearing cover

of

the engine,

by

taking out four

M8

X

18

bolts.

(See

Fig.

10-25.)

Fig.

10-25

-

40

-

Tool

12mm box spanner

or

Socket wrench

12mm box spanner