User manual

Manual Tuning A-5MN1851
Velocity Parameter (Refer to Help→“Unit Conversion from Linear to Rotary” for more information)
Set the velocity parameters of the control:
Refer to “Velocity Parameters (RPM → m/s)” at the end of this section.
1. Scale factor - ratio of the input voltage to output speed.
2. Minimum velocity
3. Time to maximum velocity
Click “Download” when finished.
Figure A-14 Velocity Parameter Screen
Drift If you know the input offset value of the control, you may enter the value manually.
Otherwise, you may initiate automatic offset tuning and let the control measure
and set this value. Click “Download” when finished.
Figure A-15 Drift Parameter Screen