Product Manual

Receiving & Installation 3-5
MN2421
The POW’R LITE assembly Continued
8. Remove the cotter pin, washer and pin from the Winch Cable Tie Point of the mast.
9. Secure the loop end of the winch cable to the mast Winch Cable Tie Point using the
pin, washer and cotter pin removed in step 8.
POW’R LITE cable connections can now be made.
1. Route the POW’R LITE cable down the mast support into the bottom of the control box.
Be sure to use the clamps, shown in Figure 3-2 to secure the cable to the generator.
Figure 3-6 POW’R LITE Assembly
Green
Red
Black
Power cable
Brown
Yellow
Power
cable
POW’R LITE cable
Green
Red
Black
Blue
Orange
Connector for Front
Panel Switches
2. Connect the POW’R LITE cable wires to the capacitors as follows:
(See Figure 3-6)
a. Red wire to capacitor #1.
b. Blue wire to capacitor # 2.
c. Black wire to capacitor # 3.
d. Orange wire to capacitor # 4.
e. Green wire to ground lug.