Product Manual

Section 1

Product Safety Information

Product Safety Information 1-1MN2421

This kit can be installed on several models of the Baldor Towable Generators. This manual

contains Installation and Operation instructions for the POW’R LITE Kit and components only.

Please refer to the manual for the generator for operation and maintenance instructions for the

generator portion of the product.

Responsibility

When your generator is delivered, it becomes the responsibility of the owner/operator of the

generator set to prevent unsafe conditions and operation of the equipment. Some

responsibilities include (but are not limited to) the following:

1. It is the responsibility of the owner/operator of this generator to ensure that this

equipment is correctly and safely installed.

2. It is the responsibility of the owner/operator of this generator to ensure that this

equipment, when installed fully complies with all federal, state and local codes.

3. It is the responsibility of the owner/operator of this generator to ensure that any person

operating this equipment has been properly trained.

4. It is the responsibility of the owner/operator of this generator to ensure that any person

operating this equipment has access to all manuals and information required for the

safe use and operation of this equipment.

5. It is the responsibility of the owner/operator of this generator to ensure that it is properly

maintained and safety inspected at regular scheduled intervals.

6. It is the responsibility of the owner/operator of this generator to ensure that any person

who has not been trained on the safe use of this equipment does not have access to

this equipment.

Read This Manual Thoroughly

If you do not understand any concept, any procedure, any safety warning statement, any safety

caution statement or any portion of this manual, seek expert advise. Make sure you understand

the information in this manual so that you can safely enjoy the full use of this generator.

This symbol is shown throughout the manual to indicate a connection to ground reference point.

Symbols

Indicates a potentially hazardous situation which, if not avoided, could result in injury or death.

WARNING: When erecting or stowing the mast assembly, be aware of the pinch points such as where the

tower structures join or where the cable and winch are located. Careless operation can result

in injury. Keep extremities away from moving parts to avoid injury.

WARNING: Before erecting the mast assembly, be certain that the outriggers are properly set to stabilize

the light tower and that they are secure and are not damaged. Erecting the mast without

setting the outriggers can cause the light tower to tip over when raising the mast.

WARNING: Before erecting the mast assembly, be certain that there are no overhead wires. Contact with

overhead wiring presents an electrical shock hazard that may cause severe injury or death.

WARNING: Before erecting the mast assembly, be certain that there are no overhead obstructions that

the mast will hit when raising it. Hitting an object (tree limb etc.) may damage the mast or

cause the light tower to tip over and may result in injury or property damage.

WARNING: The mast assembly must remain in the stowed position until the outriggers are properly set to

stabilize the trailer . Erecting the mast without setting the outriggers can cause the light

tower set to tip over when raising the mast.