Product Manual

Section 3
Receiving & Installation
Receiving & Installation 3-1MN2421
Receiving & Inspection When you receive your generator, there are several things you should do immediately.
1. Observe the condition of the shipping container and report any damage immediately to
the commercial carrier that delivered your system.
2. Verify that the part number of the system you received is the same as the part number
listed on your purchase order.
3. If the system is to be stored for several weeks before use, be sure that it is stored in a
location that conforms to published storage temperature and humidity specifications.
WARNING: Never stand under or close to an object that is being hoisted or lift into position. Accidents
happen and if the object falls or tips over you or someone else could be crushed by the
weight of the object causing severe injury or death to to yourself or others. Always remain a
safe distance from the object and always wear protective head gear (hard hat).
Figure 3-1 and Table 3-1 show the overall dimensions of the POW’R LITE kit.
Refer to the towable generator manual for the dimensions of the towable generator, MN2417.
Figure 3-1 Overall Dimensions
A
A1
B
A2
C
Minimum
Extension
with Lights
Maximum
Extension
with Lights
14.00001 TS25/35
14.00001-G2 TS45/60/80
Lift Winch
Tilt Winch
TS25/35 Both Tilt and Lift Winches are mechanical
TS45/60/80 Tilt is Mechanical, Lift Winch is electric
Note: Optional Electric Winch kits may be ordered for
either or both winches in all models.
Light Mast Kits:
TSLM35T - fits TS25/35 Towable Generators
TSLM80T - fits TS45/60/80 Towable Generators