Instructions / Assembly

TURN TO LEARN POSITION
ROTATE
1/4 TURN
TO RIGHT
BEFORE YOU START
These steps show you how to change from the current key that
operates the lock to a new key you want to operate the lock. For new
purchases, the current key is the one that was supplied with the lockset.
Be sure to install the product on the door first. Also, these steps
should be done while the door is open.
These instructions illustrate a deadbolt for demonstration purposes, but
these SmartKey rekeying instructions also apply to keyed knobs, levers,
and handlesets.
LEARN POSITION
FRONT VIEW
SMARTKEY TOOL
INSERT CURRENT KEY
1
2
A
B
C
SMARTKEY
TOOL HOLE
CURRENT KEY
NEW KEY
PUSH TOOL ALL
THE WAY IN
THEN REMOVE
TOOL
TAKE OUT CURRENT KEY
BE CAREFUL NOT TO ROTATE
WHEN REMOVING.
IF KEY DOES NOT PULL OUT, RETURN TO STEP 2A
LEARN POSITION
START POSITION
INSERT AND REMOVE SMART KEY TOOL
SMARTKEY
TOOL
SMARTKEY
TOOL HOLE
LEARN POSITION
3
LEARN POSITION
REMOVE NEW KEY WHEN FINISHED
ROTATE
1/4 TURN
TO LEFT
LEARN NEW KEY
INSERT NEW KEY - FULLY!
BE CAREFUL NOT TO ROTATE
WHEN INSERTING
If problem persists, Call
1-877-315-7853
FINISH POSITION
www.baldwinhardware.com

Summary of content (2 pages)