Specification Sheet

195

RIM LOCKS – STANDARDS & SPECIFICATIONS

Pride in our American Heritage and renewed interest in its early history

has greatly inﬂuenced U.S. architecture. With careful research and design,

Baldwin has authentically reproduced a piece of that heritage – colonial

rim locks.

> Constructed with solid forged brass parts for exceptional durability

and smooth operation

> Trim designs secured to a broached spindle with an epoxy (resin)

coated set screw – prohibits screw from loosening

> Interior rim locks use bit keys. Bit keys may be ordered ﬁxed

permanently into the lock by ordering as .RBIT or .LBIT

conﬁgurations.

NOTE: Hand of door is always determined from outside

IMPORTANT: A dummy trim rim lock must be used on ALL pairs of reverse bevel doors

LEFT HAND CONDITION

(SINGLE DOOR)

RIGHT HAND CONDITION

(SINGLE DOOR)

Handing of Rim Lock Plates

Rim lock mechanism

PAGE 1
rim locks – Pride in our American Heritage and renewed interest in its early history has greatly influenced U.S. architecture. With careful research and design, Baldwin has authentically reproduced a piece of that heritage – colonial rim locks. > Constructed with solid forged brass parts for exceptional durability and smooth operation > Trim designs secured to a broached spindle with an epoxy (resin) coated set screw – prohibits screw from loosening > Interior rim locks use bit keys.