Specification Sheet

ManualsBrandsBaldwin ManualsHardwareRight Handed Emergency Egress Mortise Lock Body for Knobs with 2-3/4 Inch Backset

Lock Speciﬁcations

Door Hardware Lock Speciﬁcations

Summary of content (22 pages)

PAGE 1
Door Hardware Lock Specifications Directory Lock Type Page 1 Lock Specifications Exterior Mortise Lock Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.5″ Backset Mortise Locks Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.5″ Backset Mortise Lock Functions (6301, 6310, 6315, 6318, 6320, 6321, 6325, 6375) . . . . . . . . . . . . . . .
PAGE 2
Exterior Mortise Locks Lock Specifications Construction: Refer to Section h of this catalog. Exterior Mortise Locks Backsets: Available 2.5″ (64mm)–2.75″ (70mm) for knobs and levers. Contact customer service for special applications. Keying: All levels of keying including construction keying are available. Refer to Section k of this catalog. Contact customer service for special applications. Strike: Base metal of Brass and finished to match. Supplied to ANSI standard A115.1, 1.25″ (32mm) lip-to-center.
PAGE 3
2.5″ (64mm) Backset Mortise Locks For Doors 1.375″ (35mm)/1.75″ (44mm) Thick and Over Steel Case: .75″ × 3.5″ × 5.5″ (19 × 89 × 140mm) Front*: Hot forged brass .218″ × 1.25″ × 8″ (6 × 32 × 203mm). Adjustable for beveled conditions. * Optional 1″ (25mm) front with .75″ (19mm) solid latch bolt available for doors of 1.375″ (35mm) in thickness. Furnished standard with a curved lip strike. Scalp: Wrought brass and bronze, available in matching finishes. Anti-Friction Latch Bolt: Hot forged brass .
PAGE 4
2.5″ (64mm) Backset Mortise Locks Residential Entrance 2.5″ Backset Mortise Lock Latch bolt by thumb latch outside and knob inside, except when thumb latch is locked by stop in front; then latch bolt by key outside and knob inside. Dead bolt by key outside and turn knob inside. Continuous turn of key outside retracts both latch and dead bolt. 1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment. When extended, dead bolt deadlocks latch bolt. Weight: 3 lbs. (1.36kg) No.
PAGE 5
2.5″ (64mm) Backset Mortise Locks Residential Entrance—Emergency Egress Latch bolt by knob from either side, except when outside knob is locked by stop in front; then latch bolt by key outside and knob inside. Dead bolt by key outside and turn piece inside. When dead bolt is thrown, stop is automatically activated making outside knob rigid. Inside knob retracts latch and dead bolt simultaneously but DOES NOT free outside knob. Weight: 3 lbs. (1.36kg) NOTE: Lock function is not reversible – specify hand.
PAGE 6
2.75″ (70mm) Backset Mortise Locks 2.75″ Backset Mortise Lock For Doors 1.75″ (44mm) Thick and Over Lock Specifications: Standardized heavy steel case is smooth, easy to mortise, and assures snug and solid fit in door mortise. Vital interior working parts are made of solid hot forged brass or steel for a lifetime of trouble-free operation. Armored front provides maximum strength and protection against tampering. Most lock functions are completely reversible.
PAGE 7
2.75″ (70mm) Backset Mortise Locks Residential Entrance Latch bolt by thumb latch outside and knob inside, except when thumb latch is locked by stop in front; then latch bolt by key outside and knob inside. Dead bolt by key outside and turn knob inside. Continuous turn of key outside retracts both latch and dead bolt. Weight: 3 lbs. (1.36 kg) Federal Specification Equivalent: Government Type: 122A NOTE: May be used in single and double cylinder applications. No. 6020 Knob Function No.
PAGE 8
2.75″ (70mm) Backset Mortise Locks Entrance and Apartment 2.75″ Backset Mortise Lock Latch bolt by knob from either side, except when outside knob is locked by stop in front; then latch bolt by key outside and knob inside. Dead bolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and dead bolt. 1″ (25mm) throw dead bolt with saw-proof inserts is standard equipment. When extended, dead bolt deadlocks latch bolt. Weight: 3 lbs. (1.36kg) No. 6001 Knob Function No.
PAGE 9
2.75″ (70mm) Backset Mortise Locks Bathroom and Bedroom Latch bolt by know either side. Dead bolt by turn piece inside and emergency key No. 0417 outside. Weight: 2.8 lbs. (1.27kg) Federal Specification Equivalents: ANSI Series: 1000-F02 No. 6100 Knob Function No. 6100-LS Lever Function Privacy Latch bolt by knob either side. Dead bolt by turn piece inside and emergency key No. 0417 outside. Inside knob retracts latch and dead bolt simultaneously, automatically unlocking outside knob.
PAGE 10
Interior Mortise Lock Features: Case is formed from heavy gauge steel for strength and assures solid fit in mortise preparation. Vital interior working parts are made of solid hot forged brass for a lifetime of trouble-free operation. Completely reversible for all door conditions. Steel Case: .625″ × 3.375″ × 3.75″ (16 × 86 × 95mm) Front: Hot-forged brass .156″ × 1″ × 5.75″ (4 × 25 × 133mm). Adjustable for beveled conditions; finished to match. Interior Mortise Lock Latch Bolt: .5″ × .625″ (13 × 16mm) × .
PAGE 11
Armored Fronts Armored Front— 1.25″ (32mm) Features: Removable armored fronts protect the lock against tampering of the cylinder yoke assembly. Available in all matching finishes of mortise locks. Ordering Instructions: Specify part number indicated below and finish required. 6000 Series Armored Front— 1.25″ (32mm) Features: Removable armored fronts protect the lock against tampering of the cylinder yoke assembly. Available in all matching finishes of mortise locks.
PAGE 12
Mortise Strikes Standard Latch—Deadbolt Function Size: Base: 1.25″ × 4.875″ (32 × 124mm) × 1.25″ (32mm) Lip-to-Center Thickness: .093″ (2.3mm), brass material. Mortise Strike Specifications Screws: Furnished with No. 12 combination wood/machine screws, finished to match. Template: Designed to fit metal/wood frames prepared in accordance to ANSI A115.1/ A115.11. Features: Furnished flat with rounded lip edges for universal use with left and right handed locks.
PAGE 13
Mortise Bolt Specifications No. 0413 Features: Exceptional quality heavy duty mortise bolt, constructed with a steel housing and forged brass components. Smooth and positive action. Designed for use with tubular latches for privacy/patio condition. Mortise bolts may be installed above or below latches, depending upon visibility. Emergency release trim available at an additional charge. Available less turn piece. Order 0418.XXX. LTP or 0413.XXX.
PAGE 14
Tubular Handleset Latch 0.8 1.1 0.8 Tubular Latch 1.1 Tubular Handleset Latch 0.8 1.1 Features: Latches are handed and fully adjustable for 3 3 2 8⁄ ″ and 2 4⁄ ″ doors. Sturdy non-rusting construction throughout. All component parts are made from 1.5 durable materials and manufactured to precision tolerances for extended service. Dust 1.5 Box No. 5510.000 supplied as standard equipment. Weight Each: .5 lb. (.23kg) 2.7 2.7 1.5 2.7 1.9 1.9 1.9 Adjustable 2 3⁄8″ Backset 3.4 3.4 2.4 0.5 1.0 2.
PAGE 15
Passage Tubular Latches Passage Latch Standard Box Strike * Optional Face Plate: Indicates supplied with a 1.125″ (29mm) face plate. ″ Weight Each: .5 lb. (.23kg) No. 5510 (for knob trim) No. 5512 (for knob trim)* No. 5513 (for lever trim) No. 5515 (for lever trim)* 2 3⁄4″ Backset No. 5520 (for knob trim) No. 5522 (for knob trim)* No. 5523 (for lever trim) No. 5525 (for lever trim)* Optional Face Plate* *Optional Face Plate *No. 5512 *No. 5515 *No. 5522 *No.
PAGE 16
Privacy Tubular Latches Privacy Tubular Specifications Privacy Latch Features: Hub rotation of only 28° is required to retract the latch bolt. Latches are non-handed and have fully adjustable fronts for use on beveled doors. Sturdy non-rusting construction throughout. Bolt head features an anti-friction insert for smooth operation. All component parts are made from durable materials and manufactured to precision tolerances for extended service.
PAGE 17
Tubular Latch Strikes Standard Box Strike Size: .062″ × 1.125″ × 2.75″ (2 × 29 × 70mm) Lip-to-Center Dimension: 1.312″ (33mm). Other Lip-to-Center lengths are available at an additional charge. Maximum Lip-to-center available is 3.438″ (87mm). Fasteners: Screws included. Template: Metal frames to be prepared in accordance with ANSI standard A115.2. No. 5510.XXX.TSTR Extended Lip Box Strike Size: .062″ × 1.25″ × 2.75″ (2 × 29 × 70mm) Lip-to-Center Dimension: No. 5510.XXX.E158 1.
PAGE 18
Deadbolt Latches Deadbolt Latches Deadbolt Latch Specifications Features: All Deadbolts are furnished with a 1″ (25mm) throw. Each contains a saw-proof, hardened steel insert to prevent tampering. Fronts are adjustable for beveled door conditions. All deadbolts have an adjustable backset feature to accommodate 2 38⁄ ″ or 2 34⁄ ″ backsets. Weight: .6 lb. (.27kg) Adjustable Front Length Front Width Backset Item No. Type of Lockset 8201.XXX.
PAGE 19
Mortise Cylinder Length of Mortise Cylinders: The length of a Baldwin cylinder is the measurement from the back edge of the cylinder cap to the outer surface of the cam as illustrated. Item Number C(03) Keyway Cylinder Length Door Thickness 1 38⁄ ″ (35mm) 1 34⁄ ″ 8325 1 12⁄ ″ (38mm) 2″ 8326 1 ⁄ ″ (41mm) 2 12⁄ ″ 8327 1 34⁄ ″ (44mm) 2 34⁄ ″–3″ 8328 2″ (51mm) 5 8 8324.XXX 8325.XXX 8326.XXX 8327.XXX 8328.
PAGE 20
Spindles Passage/Privacy Knob & Lever Spindle Spindle Specifications Features: Standard door—fits various door thickness from 1 38⁄ ″–1 34⁄ ″ and allows ease of assembly. Thick door—fits various door thickness from 2″–2 12⁄ ″ and allows ease of assembly. Standard Door Thickness 0.50 0.29 2.36 10021.000 Passage/Privacy Spindle Thick Door 0.50 0.29 2.76 10019.
PAGE 21
Spindles 8mm Multi-Point Patio Spindle Features: Patio door—fits various door thickness from 1 38⁄ ″–2 14⁄ ″ and allows ease of assembly. Thick door—fits various door thickness from 2 1 ⁄ ″–3″ and allows ease of assembly. 2 Standard Door Thickness 0.50�� 2.68�� 11507.000 Multi-Point Patio Spindle Thick Door 0.50�� 0.314�� 3.06�� 11508.000 Multi-Point Patio Spindle 21 Spindle Specifications 0.
PAGE 22
Surface Bolt Strikes Mortise Strikes Features: Solid bronze mortise strike. 1.00 0.13 Surface Bolt Strikes 2.50 10552.471.MORT 10552.474.MORT 10562.473.MORT Mortise Strike Mortise Strike Mortise Strike Universal Strikes Features: Solid bronze mortise strike. 2.38 1.00 2.16 0.13 10553.471.UNIV 10553.474.UNIV 10563.473.