Installation & Assembly

ManualsBrandsBaldwin ManualsDoor Hardware & Accessories5485V Soho Single Dummy Door Lever with R026 Rose

Door Prep for Small Rosettes

ese instructions MUST be used for all rosettes with diameters less than 2.5˝ and doors thicker than 1-3/4˝.

Optional for door thickness of 1-3/8˝ to 1-3/4˝ with a 5/8˝ face bore.

Summary of content (5 pages)

PAGE 1
Door Prep for Small Rosettes These instructions MUST be used for all rosettes with diameters less than 2.5˝ and doors thicker than 1-3/4˝. Optional for door thickness of 1-3/8˝ to 1-3/4˝ with a 5/8˝ face bore. ©2017 Spectrum Brands, Inc. PK.
PAGE 2
Installing Passage Locks with Small Rosettes These instructions MUST be used for all rosettes with diameters less than 2.5˝ and a door thickness of 1-3/8˝ to 1-3/4˝ with a 5/8˝ face bore. Backplate Installation Process 1. Use instructions and template to install latch. 2. Insert the spindle into the latch. 3. Position the backplates over the spindles and insert the alignment bushings into the backplates. 4. For dummy installations level the bottom edge. 5.
PAGE 3
Installing Privacy Locks with Small Rosettes These instructions MUST be used for all rosettes with diameters less than 2.5˝ and a door thickness of 1-3/8˝ to 1-3/4˝ with a 5/8˝ face bore. 1 2 rose rose retainer spanner tool hole location After completing the latch and backplate installation, a hole for the privacy button needs to be drilled. The first step is to remove the alignment bushings and spindle used for the backplate installation process. ©2017 Spectrum Brands, Inc.
PAGE 4
Door Prep for Large Rosettes These instructions may be used for rosettes with diameters greater than 2.5˝ and a door thickness of 1-3/8˝ to 1-3/4˝ with a 2-1/8˝ face bore. ©2017 Spectrum Brands, Inc. PK.
PAGE 5
Installing Passage or Privacy Locks with Large Rosettes These instructions may be used for rosettes with diameters greater than 2.5˝ and a door thickness of 1-3/8˝ to 1-3/4˝ with a 2-1/8˝ face bore. Adapter Installation Process 1. Use instructions and template to install latch. 2. Position the adapters so the #10 machine screws are inserted from the inside face of the door. 3. Loosely thread the #10 machine screws through the inside adapter into the outside adapter. 4. Insert the spindle into the latch.