Specification Sheet

DI M E NSIONS & SPECI F IC AT IONS – k NOB S

KNOBS

ELI ROU RUS TRA

A 2-5/16” 2-7/32” 2-7/32” 2-1/4”

A (Keyed) 2-3/16” 2-3/16” 2-3/16” 2-3/16”

B 2-7/16” Ø 2-3/16” Ø 2-3/16” 2-7/32”

ROSES

TRR TAR TSR CRR CSR RAR RSR

C 2-9/16” 2-21/32” 2-19/32” 2-9/16” 2-9/16” 2-11/16” 2-5/8”

D 2-9/16” 3-7/16” 2-19/32” 2-9/16” 2-9/16” 4-1/2” 4”

KNOB SPECIFICATIONS

Door Preparation 2-1/8” Cross Bore. 1” edge bore for latch.

Door Thickness 1-3/8” to 2” standard. 2” to 2-1/2” doors optional through thick door option or service part kit.

Cylinder Baldwin 5-pin C-Keyway.

Backset Adjustable 2-3/8” or 2-3/4”

Front & Latch Square Corner Adjustable (SL) standard. Round Corner (RL), Drive In (DL), or 6 Way Adjustable (6L) optional.

Strike Square Corner (SS) standard. Round Corner (RS), or Dual Strike (DS) optional. Extended Lip strike shipped with all thick door locks (ES).

Latch Bolt ½” passage/privacy/entry function bolt.

Handing Handing not required.

ANSI/BHMA Tested to exceed ANSI/BHMA Grade 2 security.

ADA N/A

UL 20-minute certiﬁed UL option available.

PAGE 1
Dimensions & Specifications – Knobs C A D B KNOBS A A (Keyed) B ELI ROU RUS TRA 2-5/16” 2-7/32” 2-7/32” 2-1/4” 2-3/16” 2-3/16” 2-3/16” 2-3/16” 2-7/16” Ø 2-3/16” Ø 2-3/16” 2-7/32” ROSES TRR TAR TSR CRR CSR RAR RSR C 2-9/16” 2-21/32” 2-19/32” 2-9/16” 2-9/16” 2-11/16” 2-5/8” D 2-9/16” 3-7/16” 2-19/32” 2-9/16” 2-9/16” 4-1/2” 4” KNOB SPECIFICATIONS Door Preparation 2-1/8” Cross Bore. 1” edge bore for latch. Door Thickness 1-3/8” to 2” standard.