Installation Guide

MULTI-POINT

INSTALLATION INSTRUCTIONS

SPRINGFIELD TRIM SHOWN

SEE HARDWARE

CATALOG FOR HOLE SPACING

Entrance American Cylinder Function Exploded View

INTERIOR TRIM

LOCK BODY

SPINDLE

POSITION NOTCHES

TOWARDS DOOR

EXTERIOR

THREADED

SCREW POSTS

SEE NOTE

PRESS-IN

BUSHINGS

LEVER SET SCREWS

ALIGN WITH

SPINDLE GROOVE

EXTERIOR TRIM

LOCK

CYLINDER

BRACKET

SCREWS

INTERIOR #8

MACHINE SCREWS

DRILL THROUGH 5/16”

SEE NOTE

Lock Cylinder Note: Shown is the lever on the top of the lock cylinder. The lever may be on

the bottom, depending on the lock.

#8 Machine Screws Note: Proper trim alignment requires installing the spindle and levers

before completely securing the #8 screws.

Threaded Screw Posts Note: Length may need to be cut down to accomodate different

door manufacturers’ hole pattern.

CYLINDER PIN

HOUSING FACING

UP. SEE NOTE

RECOMMENDED CYLINDER

ORIENTATION

PK 5903 (10/07)

PAGE 1
MULTI-POINT Installation Instructions Entrance American Cylinder Function Exploded View SPRINGFIELD TRIM SHOWN SEE HARDWARE CATALOG FOR HOLE SPACING INTERIOR TRIM LOCK BODY SPINDLE POSITION NOTCHES TOWARDS DOOR EXTERIOR THREADED SCREW POSTS SEE NOTE PRESS-IN BUSHINGS INTERIOR #8 MACHINE SCREWS DRILL THROUGH 5/16” SEE NOTE RECOMMENDED CYLINDER ORIENTATION CYLINDER PIN HOUSING FACING UP.
PAGE 2
MULTI-POINT Installation Instructions Patio American Cylinder Function Exploded View SPRINGFIELD TRIM SHOWN SEE HARDWARE CATALOG FOR HOLE SPACING INTERIOR TRIM LOCK BODY SPINDLE POSITION NOTCHES TOWARDS DOOR EXTERIOR THREADED SCREW POSTS SEE NOTE TURN KNOB PRESS-IN BUSHINGS SEE NOTE INTERIOR #8 MACHINE SCREWS DRILL THROUGH 5/16” SEE NOTE LEVER SET SCREWS ALIGN WITH SPINDLE GROOVE EXTERIOR TRIM Turn Knob Note: Shown is the lever on the top of the turn knob.