Installation Guide

3
Aluminum
Housing
for the
EasyShade
Assembly

Set Screw


Surface


Round
Head
Screw
Figure 4

Bracket
Protruding


Recessed

of the
EasyShade
Assembly
INSTALLATION
ATTACH SOLAR PANEL TO EASYSHADE

HOUSING


Figure 3
1. Connect the Power Cord between the Motor and


Secure the ends together using the Screw Locking
Figure 3
2.
Note: When posioning the Solar Panel on the
Housing, route the Power Cable that is connected to
the Motor behind the housing. Move the Solar Panel
far enough away to remove slack in the Power Cable.
Total length of the combined Cable is about four
feet. For narrow EasyShades, excess Cable can be
tucked behind the Housing.
2a.
under the front of the Fabric Panel Opening of the
Figure 3
2b.
Figure 3
3. 



MOUNT EASYSHADE

HOUSING TO HOUSE
4






INSTALL MOUNTING BRACKET - VERTICAL



Figure 4
Note: Aluminum Housing and Cable Brackets need
to be mounted on the same Vercal Surface. If
mounted to siding, it may be necessary to shim the
Brackets to create a at mounng surface.
SOLAR PANEL AND BATTERY
It is recommended the Solar Panel be placed in




If you are not installing right away, place the Solar

Figure 3

Power Cord


Panel under
Opening
in the
EasyShade
Housing

Allen screw

onto Housing