Installation Guide
4
6
Note the orientaon of
the Bracket
See Figure 5
8
See Figure 7
Note: The Up and Down Stop Limits on the
EasyShade Motor were set at the factory prior to
shipment. The Down Stop Limit was set for a 36”
extension. This will allow for compleon of the
installaon process.
9DOWN
Figure 8
Once you have extended the EasyShade, unplug the
Motor Power Cord from the Solar Panel Cord
Note: If the EasyShade does not respond when you
press the DOWN
the DOWN Figure 9
Channel Lights comes on, press the Channel Selector
See Figure 9
Figure 9
Figure 8
Use Channel 1 to
operate your EasyShade
Figure 5
Set
Screw
Round
Head
Screw
Bracket
Protruding
Top Groove
of Housing
EasyShade
Aluminum
Housing
Recessed
EasyShade
Assembly
House
INSTALL MOUNTING BRACKET - HORIZONTAL
Set Screw
Recessed Area
Bracket
EasyShade
Housing
Figure 6
7
Top Groove of the EasyShade Assembly onto the
Figure
4 and 5
the Top Groove of the EasyShade Assembly on the
the Set Screw is aligned in the Recessed Area of the
Figure 6
INSTALL EASYSHADE
INTO BRACKETS
Figure 7
EasyShade
Assembly
Brackets
Set Screws
Set Screws
First Light on the
Use Channel 1
to operate your
EasyShade.