Installation Guide

6
19

Figure 17
Figure 17
Note: The Solar Screen is preset to stop 36” from the
Housing. This posion can be changed to lower the
Solar Screen as much as 84” from the Housing.
20Plug in the Motor.
Press and release the UP

Figure 18
21
DOWN

the EasyShade to the current
Let the
EasyShade stop on its own
See Figure 18
22UP and DOWN
simultaneously

See Figure 18
Note: The EasyShade is temporarily in Programming
Mode. The UP and DOWN buons on the
Remote Transmier must be pressed and held to
reposion the EasyShade. When either buon is
released, the Solar Screen will stop moving.
23DOWN or UP
to adjust the new Down
marked in Step 12Figure 12
CAUTION: Do not let the EasyShade extend more
than 84” from the Housing. See Figure 19.
24STOP (my) 

Down
UP and DOWN

UP


Figure 18
Figure 19
EasyShade
Housing
Up Limit,

Housing

Solar Screen Extension

Cable Guide
Bracket
Leading Bar in

17
Cables through the hole in the Cable Guide Bracket

Cable Guide Stops onto the Vinyl Coated Cable and


See Figure 15
18
Cable Tension by turning the Cable Stop Nut Counter

See Figure 16
Note: Do not over ghten the Cable.
Figure 15
Note:
The Cable Guide
Stop installs
underneath the
Cable Guide
Bracket, with threads
poinng up.
Cable Guide
Bracket
Cable Guide
Stop

Wrench
Figure 16
Adjust Cable Tension
by turning this Cable

Open End Wrench