Use and Care Manual

ManualsBrandsBALKENE HOME ManualsAccent TablesGreenwich Collection 47.25 in. Black Particle Board Rectangular Media Console

GREENWICH COLLECTION

MEDIA CONSOLE

Item#: 63965

sAve these instructions

for future reference.

AttAch Your receiPt here

Keep a copy of your proof of purchase or order

conrmation which will be needed if you need to

Purchase Date:

Questions, problems, missing parts?

Before returning to your retailer, our Florida-based customer service team is available.

Call toll-free (866) 985-7877 9 a.m. – 9 p.m., EST

Live chat

cservice@welltraveled.net

www.balkenehome.com 9 a.m. – 6 p.m., EST, Monday – Friday

06032021

Summary of content (8 pages)

PAGE 1
GREENWICH COLLECTION MEDIA CONSOLE Item#: 63965 AttAch Your receiPt here Keep a copy of your proof of purchase or order confirmation which will be needed if you need to contact us about warranty coverage. sAve these instructions for future reference. Purchase Date: Questions, problems, missing parts? Before returning to your retailer, our Florida-based customer service team is available. Call toll-free (866) 985-7877 9 a.m. – 9 p.m., EST Email cservice@welltraveled.net Live chat www.balkenehome.
PAGE 2
INFORMATION BEFORE YOU BEGIN Before beginning assembly, make sure all parts are present. Compare parts received with the “Parts List.” If any part is missing or damaged, do NOT attempt to assemble the product. Please read and understand this entire manual before attempting to assemble, operate or install this product. If you have any questions regarding the product, please contact Customer Service: Call toll-free (866) 985-7877 Email cservice@welltraveled.net Live chat www.balkenehome.com 9 a.m.
PAGE 3
PARTS LIST C H F J B K D I A G E UANTIT PART DESCRIPTION A Left Side 1 B Right Side 1 C Top Shelf 1 D Middle Shelf 1 E Bottom Shelf 1 F Top Divider 1 G Bottom Divider 1 H Upper Shelf Face 1 I Middle/Lower Shelf Face 2 J Upper Shelf Backer 1 K Lower Shelf Backer 1 L Support Leg 1 I L CONTENTS 1 2 3 4 5 6 Cam Bolt Qty: 16 Cam Lock Nut Qty: 16 Dowel Qty: 23 Medium Screw 4x35mm Qty: 5 Large Screw 4x45mm Qty: 6 Foot Pad Qty: 4 PREPARATION Before begin
PAGE 4
ASSE 1 On a soft, nonabrasive surface, place the Left Side A, Right Side B, and both Middle/Lower Shelf Faces I with the inside of each facing up. Insert the threaded ends of a Cam Bolt 1 into each of the holes indicated in the diagram (4 per Side and 2 per Shelf Face). Use a Phillips-head screwdriver to tighten each Cam Bolt until its threads are fully inserted. 1 B A 1 1 1 1 Peel the paper from each Foot Pad 6 and apply the adhesive side firmly to the feet of each Side.
PAGE 5
ASSE 4 Place the Bottom Shelf E upside-down on a soft surface. On the remaining Middle/Lower Shelf Face I, insert a Dowel 3 into the hole midway between the 2 Cam Bolts installed in Step 1. 4 Join the Shelf Face to the front edge of the Lower Shelf as shown (Shelf Face should form a lip toward the bottom side of the Shelf), by inserting the hardware of the Shelf Face into the holes in the edge of the Shelf.
PAGE 6
ASSE 7 Attach the Left Side A to the assembled Shelves: insert Dowels 3 into each of the 3 pairs of holes on the inside front leg of the Left Side. Slide the Dowels and the previously-installed Cam Bolts into the corresponding holes in the left edge of each Middle/Lower Shelf Face I and into the left edge of the Upper Shelf Face H.
PAGE 7
ASSE 10 Place the Top Shelf C upside-down on a soft surface. Insert and tighten Cam Bolts 1 into the 2 indicated holes near the center of the Shelf. Hardware Used: 11 1 1 C 1 Cam Bolt x 2 Insert a total of 5 Dowels 3 into the indicated holes in the top edge of the Left/Right Sides A/B and the middle of the Upper Shelf Face H. Slide the Upper Shelf Backer J into the grooves at the rear of the Left/Right Sides.
PAGE 8
LIMITED WARRANTY Customers in the Contiguous US With proof of purchase from an authorized retailer, this product is warranted for a period of 1 year from original purchase date against defects in materials and workmanship under normal use. This warranty does NOT cover normal wear/weathering, exposure to water, freezing temperatures, oils, fluids, or chemicals OR use in a commercial context if the unit is not designated as a commercial model.