Use and Care Manual

Contact us for assistance: [phone] | www.balkenehome.com 6
ASSEMBLY
7
8
9
Attach the Left Side A to the assembled Shelves: insert
Dowels 3 into each of the 3 pairs of holes on the inside
front leg of the Left Side
. Slide the Dowels and the
previously-installed Cam Bolts into the corresponding
holes in the left edge of each Middle/Lower Shelf Face I
and into the left edge of the Upper Shelf Face H.
Hardware Used: 2 Cam Lock Nut x 4
3 Dowel x 6
E
2
D
H
A
Secure the Left Side to the Shelves by inserting a
Cam Lock Nut 2
(with arrow pointed toward edge)
into the indicated holes on the underside of the
shelves adjoining each Cam Bolt, then turning the
Cam Lock Nuts clockwise until secure.
E
D
H
K
Slide the Lower Shelf Backer K into the grooves at the
rear of Shelves D/E. Be sure to slide it all the way into
the vertical groove in the inside of the Left Side A.
Attach the Right Side B to the assembled Shelves: insert
Dowels 3 into each of the 3 pairs of holes on the inside
front leg of the Left Side. Slide the Dowels and the
previously-installed Cam Bolts into the corresponding
holes in the right edge of each Middle/Lower Shelf Face
I and into the right edge of the Upper Shelf Face H.
Hardware Used: 2 Cam Lock Nut x 4
3 Dowel x 6
Secure the Right Side to the Shelves by inserting a
Cam Lock Nut 2 (with arrow pointed toward edge)
into the indicated holes on the underside of the
Shelves adjoining each Cam Bolt, then turning the
Cam Lock Nuts clockwise until secure.
B
E
2
2
2
2
3
2
2
3
3
3
3
3