User's Manual

HF-CNTL-485- 0 2 I N S T A L L A T I O N G U I D E – R E V . 0 5 P A G E 4 O F 2 0
CHAPTER 1: CONTROLLER
INFORMATION
1 . 1 H F - C N T L - 4 8 5 - 0 2 O V E R V I E W
Welcome to the Cobalt HF-CNTL-485-02 RFID Controller – Installation Guide. This
document will assist you in the installation and setup of the Cobalt HF-CNTL-485-02
RFID Controller.
The Cobalt HF-CNTL-485-02 is a feature-rich, high frequency, Radio-Frequency
Identification device that provides read/write RFID data transmission and control
solutions to shop floor, item-level tracking and material handling applications. The
controller is designed to be compact, rugged and reliable, in order to meet and exceed
the requirements of the industrial automation industry.
1.1.1 Package Contents
Unpack the Cobalt Controller hardware and accessories. Retain the original shipping
carton and packing material in case any items need to be returned. Inspect each piece
carefully, if an item appears to be damaged, notify your EMS product distributor.
The Cobalt HF RFID Controller product package contains the following components:
P AR T N U M B E R Q T Y D E S C R I P T I O N
HF-CNTL-485-02
1 Cobalt HF Series RFID Controller (-485)
17-3122
1 HF-CNTL-485-02 Installation Guide
20-1950
2
Screw (Socket Head Cap,M5 x 20mm, Hex #4,
18-8 SS)
20-3915
2 Washer (Spring Lock, M5, 18-8 SS)
69-1289
1 Wrench Tool (Hex #4, 4mm, L-key)
00-3000
1 Cobalt HF Series Configuration Tag
Table 1-1: HF-CNTL-485-02 - Package Contents
1.1.2 Power & Communications Interface
Connection Type:
RS485
Communication Interface:
Multi-drop (Subnet16™) Bus Architecture
Interface Connector:
5-pin, Male, M12 Connector (for power and
data)
Maximum Cable Length:
300m