Datasheet

ManualsBrandsBalluff ManualsInductive SensorsInductive Sensor 1.5mm PNP, Make Contact (NO)

BES 516-3005-G-E4-C-PU-02

Ordering code: BES00H3

Inductive sensor

M05x27 mm

Small housing

DC, direct current

PNP/Normally open (NO)

Sn = 1,5 mm

Flush (shielded)

Characteristic data

Eff. switching distance Sr 1,5 mm

Tolerance Sr ±10 %

Assured operating distance Sa 1,2 mm

Hysteresis H max. (in % of Sr) 15 %

Repeat accur. R max. (% of Sr) 5 %

Ambient temperature -25...70 °C

Temp. drift max. (% of Sr) 10%

Switching freq. f max. 3000 Hz

Ready delay tv max. 25 ms

Utilisation category DC 13

Function indicator Yes

Power-on indicator No

Short-circuit protected Yes

Degree of protection as per IEC 60529 IP67

Protected against polarity reversal Yes

Protected against reverse connection Yes

Electrical data

Operating voltage

Rated operating voltage Ue DC 24 V

Ripple max. (% of Ue) 10 %

Voltage drop static max. 3 V

Rated insulation voltage Ui 75 DC V

Effective operating current Ie 100 mA

No-load current Io damped 10 mA

No-load current Io undamped 3 mA

Off-state current Ir max. 80 µA

Minimum operating current Im 0 mA

Rated short circuit current 100 A

Output resistance Ra Open collector

Load capacitance max. (at Ue) 0,2 µF

Principle of operation Inductive

Mechanical data

Housing material Stainless steel

Sensing surface material PBT

Tightening torque max. 1 Nm

Connection type Cable

Cable jacket material PUR

Cable diameter D max. 3 mm

Cable short designation Li9Y11Y

Cable length 2 m

Number of conductors 3

Conductor cross-section 0.14 mm²

Shock rating Shock, half-sinus, 30 gn, 11ms

Vibration rating 55 Hz, 1 mm ampl., 3x30 min

Degree of contamination 3

Basic data

Basic standard IEC 60947-5-2

Remarks

The sensor is functional again after the overload has been eliminated.

Embeddable: See installation notes for inductive sensors with extended swit-

ching distance 825357.

EMC: EMC-protection circuitry required, see document 825345. IVW: 2,2

Internet

Balluff Germany

Balluff USA

Balluff China

: www.balluff.com

: +49 (0) 7158 173-0, 173-370

: 1-800-543-8390

: +86 (0) 21-50 644131

1 (2)

Print date: 02.06.2012

Selection date: 02.06.2012

Definitions see main catalog

Summary of content (2 pages)

PAGE 1
BES 516-3005-G-E4-C-PU-02 Ordering code: BES00H3 Inductive sensor M05x27 mm Small housing Characteristic data Eff. switching distance Sr Tolerance Sr Assured operating distance Sa Hysteresis H max. (in % of Sr) Repeat accur. R max. (% of Sr) Ambient temperature Temp. drift max. (% of Sr) Switching freq. f max. Ready delay tv max.
PAGE 2
BES 516-3005-G-E4-C-PU-02 Ordering code: BES00H3 Inductive sensor M05x27 mm Small housing DC, direct current PNP/Normally open (NO) Sn = 1,5 mm Flush (shielded) subject to change Internet Balluff Germany Balluff USA Balluff China : www.balluff.com : +49 (0) 7158 173-0, 173-370 : 1-800-543-8390 : +86 (0) 21-50 644131 2 (2) Print date: 02.06.2012 Selection date: 02.06.