Datasheet
BES 516-3007-G-E5-C-S49
Ordering code: BES00JN
Inductive sensor
D04.0x41 mm
Small housing
DC, direct current
PNP/Normally open (NO)
Sn = 1,5 mm
Flush (shielded)
Characteristic data
Eff. switching distance Sr 1,50 mm
Tolerance Sr ±10 %
Assured operating distance Sa 1,20 mm
Hysteresis H max. (in % of Sr) 15 %
Repeat accur. R max. (% of Sr) 5 %
Ambient temperature -25...70 °C
Temp. drift max. (% of Sr) 10%
Switching freq. f max. 3000 Hz
Ready delay tv max. 25 ms
Utilisation category DC 13
Function indicator Yes
Power-on indicator No
Short-circuit protected Yes
Degree of protection as per IEC 60529 IP67
Protected against polarity reversal Yes
Protected against reverse connection Yes
Electrical data
Operating voltage
Rated operating voltage Ue DC 24,0 V
Ripple max. (% of Ue) 10 %
Voltage drop static max. 3 V
Rated insulation voltage Ui 75 DC V
Effective operating current Ie 100 mA
No-load current Io damped 10 mA
No-load current Io undamped 3 mA
Off-state current Ir max. 80 µA
Minimum operating current Im 0 mA
Rated short circuit current 100 A
Output resistance Ra Open collector
Load capacitance max. (at Ue) 0,2 µF
Principle of operation Inductive
Mechanical data
Housing material Stainless steel
Sensing surface material PBT
Connection type Connector
Connector type M08x1-S49
Shock rating Shock, half-sinus, 30 gn, 11ms
Vibration rating 55 Hz, 1 mm ampl., 3x30 min
Degree of contamination 3
Basic data
Basic standard IEC 60947-5-2
Remarks
When using an AC bridge, an electrolytic capacitor ≥ 10µF/40V parallel to Ub is
recommended.
The sensor is functional again after the overload has been eliminated.
With connector, e.g. BKS-S 49-… total length = switch length +12 mm.
Embeddable: See installation notes for inductive sensors with extended swit-
ching distance 825357.
EMC: Surge immunity; external protection circuit required. Document 825345,
Section 2.
Internet
Balluff Germany
Balluff USA
Balluff China
: www.balluff.com
: +49 (0) 7158 173-0, 173-370
: 1-800-543-8390
: +86 (0) 21-50 644131
1 (2)
Print date: 02.06.2012
Selection date: 02.06.2012
Definitions see main catalog
subject to change