Datasheet
BES 516-3048-G-E4-C-PU-02
Ordering code: BES00ME
Inductive sensor
D03.0x33 mm
Long range
Small housing
DC, direct current
PNP/Normally open (NO)
Sn = 3 mm
Non embeddable
Characteristic data
Eff. switching distance Sr 3 mm
Tolerance Sr ±10 %
Assured operating distance Sa 2,3 mm
Hysteresis H max. (in % of Sr) 20 %
Repeat accur. R max. (% of Sr) 15 %
Ambient temperature 0...70 °C
Temp. drift max. (% of Sr) 15%
Switching freq. f max. 3000 Hz
Ready delay tv max. 20 ms
Utilisation category DC 13
Function indicator Yes
Power-on indicator No
Short-circuit protected Yes
Degree of protection as per IEC 60529 IP67
Protected against polarity reversal Yes
Protected against reverse connection Yes
Electrical data
Operating voltage
Rated operating voltage Ue DC 24 V
Ripple max. (% of Ue) 10 %
Voltage drop static max. 2,5 V
Rated insulation voltage Ui 75 DC V
Effective operating current Ie 50 mA
No-load current Io damped 10 mA
No-load current Io undamped 8 mA
Off-state current Ir max. 10 µA
Minimum operating current Im 0 mA
Rated short circuit current 100 A
Output resistance Ra Open emitter
Load capacitance max. (at Ue) 0,5 µF
Principle of operation Inductive
Mechanical data
Housing material Stainless steel
Sensing surface material PET-C
Connection type Cable
Cable jacket material PUR
Cable diameter D max. 2,4 mm
Cable short designation LiFY11Y-O
Cable length 2 m
Number of conductors 3
Conductor cross-section 0.09 mm²
Shock rating Shock, half-sinus, 30 gn, 11ms
Vibration rating 55 Hz, 1 mm ampl., 3x30 min
Degree of contamination 3
Basic data
Basic standard IEC 60947-5-2
Remarks
The sensor is functional again after the overload has been eliminated.
Non-flush mounting (unshielded): See installation instructions for inductive sen-
sors with extended range 843281. Avoid pressure and contact in the area of the
clear zone cap.
EMC: EMC protection circuit needed, see 825345. Burst: 1.2 IVW: 2.2
ESD: EN 61000-4-2, 2 kV contact discharge
Internet
Balluff Germany
Balluff USA
Balluff China
: www.balluff.com
: +49 (0) 7158 173-0, 173-370
: 1-800-543-8390
: +86 (0) 21-50 644131
1 (2)
Print date: 02.06.2012
Selection date: 02.06.2012
Definitions see main catalog