User's Manual

63
63
english
Mounting the
BIS L-6022
processor
BIS L-6022
Mounting the Processor
The processor is mounted using 4 M4 screws.
M4
ca. 15
63
100
60
ca. 20
ca. 15
145
160
Head 2 Head 1
X1
X4
X2
X3
L60_2-019_828132_1007-e.p65
64
english64
Head 2 Head 1
X1
X2
X3
X4
BIS L-6022
Opening the Processor / Interface Information
BIS L-6022
interfaces
PROFIBUS
-DP
Output
PROFIBUS
-DP
Input
Connection locations
and names
Supply voltage
digital input
Function ground FE
To set the PROFIBUS-DP address, activate or deactivate, or to change the EEPROM, you
must open up the BIS L-6022 processor.
Remove the 4 screws on the BIS L-6022 and lift off the cover. See the following
for addi-
tional information.
Connection for read/write head 2 Connection for read/write head 1
Opening the
BIS L-6022
processor
Be sure before
opening that the
unit is disconnected
from power.
Mounting of the cover
(4 screws),
max. permissible tightening
torque: 0.15 Nm
Service interface