User's Manual

english

Principle

This manual is intended to guide the user in installing and commissioning the components

in the BIS L-405 identification system, so that start-up time is reduced to an absolute

minimum.

The BIS L-405 identification system belongs to the category of

read-only, non-contacting systems.

This function enables applications in which information which has been pre-coded into the

data carriers can be read out and used for further processing.

The main areas of application include

– in production for controlling material flow

(e.g., for part-specific processes),

in workpiece transport using conveying systems,

for obtaining safety-relevant data,

– in process materials organization.

The processor and the read head form a compact unit which is contained in a plastic

housing.

The data carrier represents an independent unit. It does not require line-fed power and

receives its energy from the integrated read head in the BIS L-405 identification system.

The read head continuously sends a carrier signal which supplies the data carrier as soon

as the latter has reached the required distance from the read head. The read process

takes place during this phase. The data are output in 8-bit blocks over 8 parallel data lines

and made available to the host system. These host systems may be:

– a control computer (e.g., industrial PC) having a parallel port, or

– a programmable logic controller (PLC).

Introduction

BIS L-405 Identification System

Applications

System component

function

BIS L-405-03_-00_-05-MU_834487_E_0709.p65

english6

System

components

The main components of the BIS L-405 identification system are

– the processor with integrated read head, and

– the data carrier(s).

Introduction

BIS L-405 Identification System

Data carriers BIS L-2..

Schematic

representation of an

identification system

(example)

Power

Connections to

host system