User's Manual

12
ON
S101
ON
X1
S102
X3
X4
Fig. 7: Overview of BIS L-409-... processor
1 X1 - Device terminal
2 X3 - Read head terminal
3 X4 - Jumper for operating mode
4 S101/S102 - baud rate setting
The operating mode is set using jumpers in the processor (X4):
IO-Link mode, jumper setting as shown in Fig. 7 (factory default setting)
Service mode - to be used only by Balluff service
The baud rate is set using two DIP switches S101 and S102:
S102 S101 Baud rate
OFF OFF com1 4k8
OFF ON com1 4k8
ON OFF com2 38k4 *)
ON ON com3 230k4
*) Factory default setting
–
–
Operating mode/
baud rate
Getting Started
3
BIS L-409 IO-Link Device
Processor