User's Manual

www.balluff.com 27

The read head of the processor consists of a read head module and read head carrier.

The sensing face of the read head can be positioned as desired (see Fig. 19).

Rotating the sensing face from front to up or to the side:

Unscrew both screws (6) on the read head carrier (7).

Rotate read head module (2) by 180°.

Tighten both screws (6).

Rotating the read head:

Loosen locking screw (3).

Turn read head to the desired position.

The read head can be rotated steplessly by 270°.

Tighten locking screw (3).

Note

The read head module is protected against overtightening.

The read head modules are not interchangeable.

Fig. 19: Sensing face positions

1 Sensing face

2 Read head module

3 Locking screw

4 Module BIS L-400

5 Mounting base

6 Screw

7 Read head carrier

Fig. 20: Processor BIS L-409-... overview

1 Locking screw

2 IO-Link connection

3 Ground

4 LED 1

5 LED 2

6 Read head

►

⇒

►

Orienting the

read head

6.2 Electrical

connection

Installation

BIS L-409 IO-Link Device

Processor