User's Manual

38
Add DP slave
(IO-Link Master)
Specifying
the address
The modules are located in the hardware catalog under “Other field devices”.
The IO-Link Master is added as a DP slave:
Select Profibus rail.
Add IO-Link Master as DP-Slave by double-clicking.
The slots are assigned the default settings.
Fig. 27: Adding a module as a DP slave
Double-click on the head module to open the properties.
The “Properties - DP-Slave” window opens.
Specify addressing of the head module.
Fig. 28: Specifying addressing of the head module
►
►
⇒
►
⇒
►
Startup
9
BIS L-409 IO-Link Device
Processor