User's Manual

www.balluff.com 5
This manual describes processors in the series BIS L-409-... identification system as well as
startup instructions for immediate operation.
The manual is organized so that the sections build on one another.
Section 2: Basic safety information.
Section 3: The main steps for installing the identification system.
Section 4: Introduction to the material.
Section 5: Technical data for the processor.
Section 6: Mechanical and electrical connection.
Section 7: Basics for the IO-Link communications standard.
Section 8: User-defined processor settings.
Section 9: Integration into a fieldbus system using Profibus as an example.
Section 10: Processor and host system interaction.
The following conventions are used in this manual.
Enumerations are shown in list form with bullet points.
Entry 1,
Entry 2.
Action instructions are indicated by a preceding triangle. The result of an action is indicated by
an arrow.
Action instruction 1.
Action result.
Action instruction 2.
Numbers:
Decimal numbers are shown without additional indicators (e.g. 123),
Hexadecimal numbers are shown with the additional indicator hex (e.g. 00hex).
Parameters:
Parameters are shown in italics (e.g.฀CRC_16).
Directory paths:
References to paths in which data are stored or are to be saved to are shown in small caps (e.g.
P
ROJECT:\DATA TYPES\USER DEFINED).
Cross-references indicate where additional information on the topic can be found
(see “Technical
data” starting page 16)
.
Attention!
This symbol indicates a security notice which most be observed.
Note, tip
This symbol indicates general notes.
–
–
►
⇒
►
–
–
1.1 About this
manual
1.2 Structure of the
manual
1.3 Typographical
conventions
Enumerations
Actions
Syntax
Cross-references
1.4 Symbols
Notes to the user
1
BIS L-409 IO-Link Device
Processor